- Readiness tasksReady
- Configurable checklistsOn track
- Inspections with condition evidenceApproved
- Onboarding instructionsLive
- Departure noticesSynced
Rioo Leasing & Sales · Move-Ins & Move-Outs
Move-In & Move-Out Inspection Software
Clean handovers, both ways
Move-in and move-out management in RIOO runs every arrival and departure as a tracked process, inside a property management system built natively on Oracle NetSuite. Readiness tasks, inspections, condition evidence, onboarding instructions, departure notices, documented deductions and final statements, with deposit refunds coordinated through finance.
- Lease signedE-signature complete
- Deposit receivedRecorded to GL
- Inspection14 photos · no issues
- Keys & portal inviteScheduled for move-in day
The two moments residents remember
A move-in sets the tone for a tenancy. A move-out decides whether it ends in a thank-you or a dispute. Both involve several teams (leasing, maintenance and finance) and a lot of evidence. RIOO runs each as a structured workflow, so the unit is ready on day one and every deduction on the last day can be explained.
What is a move-in and move-out workflow in property management?
A move-in and move-out workflow is the structured set of tasks, inspections and financial steps that hand a unit to a new resident and take it back at the end of a tenancy. In RIOO each step is a tracked task on the unit and lease, and each money movement posts to NetSuite.
The workflow spans three teams who rarely share a system in older stacks. Leasing owns the signed lease and the resident relationship, maintenance owns the turn and the inspection, and finance owns the deposit, prorated charges and final statement. When all three work on the same unit record, the condition evidence, the charges and the refund calculation stay connected from the first key handover to the last.
How it works
How does move-ins & move-outs work in RIOO?
Move-ins & move-outs in RIOO runs inside Oracle NetSuite. The properties, units, leases, tenants and vendors it uses are native NetSuite records, so each step updates the same data finance reports on. There is no separate system to sync, and every action keeps an audit trail. The steps below show how the work flows.
Move-in
Move-out
- 01
The lease is signed and readiness tasks are generated.
- 02
Maintenance completes the turn tasks.
- 03
A move-in inspection records the unit's condition.
- 04
The resident receives onboarding instructions and portal access.
In detail
What can RIOO do for move-ins & move-outs?
RIOO handles move-ins & move-outs with capabilities built on NetSuite records rather than a separate database. Each capability below works with the same properties, leases, tenants and ledger, so operations and finance see one version of the data. Capabilities are configured to your policies during implementation, without custom code for routine changes.
Readiness tasks
for cleaning, repairs, keys and utilities, assigned and tracked before the move-in date.
Configurable checklists
per property type and unit configuration. A furnished apartment and an unfurnished commercial suite get different task sets.
Inspections with condition evidence
photos and notes at move-in and move-out.
Onboarding instructions
delivered to the new resident or tenant.
Departure notices
captured and acknowledged.
Itemized damage assessments
beyond normal wear and tear, sent to the tenant from RIOO.
Final statements
showing every deduction, outstanding charge and the refund amount before payment is issued.
Deposit and refund coordination
with RIOO Finances.
Availability updates
Once the move-out closes, the unit's status updates so leasing can relist it.
Evidence that ends disputes
Because move-in and move-out inspections live on the same unit record, comparing them is simple. If a tenant challenges a charge, your team has the photos, the inspection reports and the calculation in one place.
In detail
Turn efficiency: what operators track
Move-outs are where vacancy cost hides. These measures, reported by property in RIOO, show where turns slow down.
Days to make ready
Calendar days from move-out inspection to unit marked ready; the main driver of vacancy loss.
Turn cost per unit
Labour and vendor bills linked to turn work orders, so costs reconcile to the GL.
Deposit return time
Days from move-out to statement issued, measured against each market's legal deadline.
Disputed deductions
Share of statements challenged by tenants, a direct test of inspection evidence quality.
Pre-leased at move-out
Units with a signed next lease before the current resident leaves.
Mapped to NetSuite
How does each move step affect the NetSuite ledger?
Each move step creates a specific NetSuite entry. The deposit is recorded as a liability, first and prorated rent post as income in the move-in period, deductions offset the deposit liability at move-out, and the refund clears it. Following these entries lets finance reconcile deposits held to active leases for every property.

- Move stepDeposit receivedNetSuite record and GL effectCustomer deposit, held as a liabilityDeposits never inflate income
- Move stepFirst and prorated rentNetSuite record and GL effectInvoice to tenant, rent income in the move-in periodPartial months bill correctly
- Move stepMove-in feesNetSuite record and GL effectInvoice lines to fee income accountsFees reported separately from rent
- Move stepDamage deductionNetSuite record and GL effectCharge to tenant, offset against the deposit liabilityEvery deduction is traceable
- Move stepRefund issuedNetSuite record and GL effectPayment from the deposit liability to the tenantLiability clears to zero
- Move stepUnpaid balance after move-outNetSuite record and GL effectOpen receivable, eligible for collections or write-offBad debt is visible by property
How it works
How does RIOO calculate a final statement at move-out?
RIOO calculates a final statement by starting from the deposit held, adding any unpaid rent and charges to the move-out date, deducting itemised damage costs supported by inspection evidence, and showing the resulting refund or balance due. The tenant sees each line before any payment is issued, with photos attached.
- 01
Prorate to the end date
Rent and recurring charges are calculated to the agreed move-out date, with credits for any prepaid days.
- 02
Compare inspections
Move-out findings are compared against the move-in inspection on the same unit, separating fair wear and tear from damage.
- 03
Price deductions
Each damage item carries a cost from a rate card, a vendor quote or a completed work order.
- 04
Net the deposit
Charges and deductions are applied against the deposit liability.
- 05
Issue the statement
The itemised statement is sent to the tenant for review within your configured timeframe.
- 06
Settle
The refund is paid, or the remaining balance moves to receivables.
Explore by topic
Deposit and handover rules by market
United States
Security deposit limits, interest requirements and return deadlines are set by state law, and many states require an itemised list of deductions within a fixed number of days after move-out. RIOO lets you set the return timeframe and statement template per property, so a portfolio spanning several states applies each state's rule.
United Kingdom
In England and Wales, a tenancy deposit on an assured shorthold tenancy must be protected in a government-approved scheme within 30 days, with prescribed information given to the tenant. Once deductions are agreed, the deposit should be returned within ten days. RIOO records the scheme reference against the lease. See UK deposit protection.
Australia
Residential bonds are lodged with the relevant state or territory authority rather than held by the landlord, and released through that authority at the end of the tenancy. Condition reports at the start of the lease are a standard requirement, so the move-in inspection in RIOO doubles as the evidence for any later bond claim.
Singapore and the UAE
In Singapore, residential deposits are set by the tenancy agreement, commonly one month's rent per year of lease. In Dubai, tenancy contracts are registered through Ejari, and utility connection with DEWA is part of move-in. RIOO tracks these as checklist items with document uploads.
Who is RIOO's move-in and move-out workflow NOT for?
RIOO's move workflow is not designed for short-stay or hotel-style operations where guests check in and out daily without a lease, deposit liability or condition inspection. Those operations are better served by a property management system built for nightly bookings, channel managers and housekeeping rotas.
It also assumes you want deposits and refunds accounted for in NetSuite. Landlords whose bonds are held entirely by a third party, with no deductions processed in-house, will use the inspection and checklist parts of the workflow but may not need the deposit accounting described above.
Move-ins & move-outs in practice
At a student residence, 300 beds turn over in one week. Each bed has its own checklist, its own inspection and its own deposit. Inspectors capture photos on mobile, deductions are itemized on the spot, and final statements go out in days rather than weeks. Meanwhile, readiness tasks for incoming residents are already in maintenance's queue.
What changes
What changes when move-ins & move-outs runs on NetSuite?
When move-ins & move-outs runs on NetSuite through RIOO, operational work and accounting stop being two separate jobs. Transactions post to the general ledger as they happen, reports use the same records as daily work, and controls come from NetSuite roles and approvals. The changes below are the ones teams usually notice first.
- Units ready on timewith turn tasks tracked.
- Defensible deductionswith photo evidence.
- Faster deposit settlementand fewer disputes.
- Shorter vacancybetween residents.
Checklist
Move-in checklist
- Lease signed and countersigned
- Deposit and first charges collected
- Unit ready, with turn tasks complete
- Move-in inspection with photos
- Keys, fobs and access codes issued
- Portal access and welcome information sent
- Utilities transferred or set up
Move-out checklist
Notice recorded, inspection completed, keys returned, final charges calculated, deposit statement issued and the unit released for turn.
Checklist
Move-out dispute prevention checklist
- Complete the move-in inspection with dated photos of every room before keys are handed over.
- Have the tenant acknowledge the move-in report in the portal.
- Send move-out guidance, including cleaning standards, when notice is received.
- Offer a pre-move-out inspection so tenants can fix issues themselves.
- Price deductions from a published rate card or actual vendor invoices.
- Issue the final statement within the legal deadline for that market.
Talk to a specialist
See move-ins & move-outs on your own portfolio.
Readiness tasks, inspections, condition evidence, onboarding instructions, departure notices, documented deductions and final statements, with deposit refunds coordinated through finance.
Can checklists differ by property type?
Yes. Separate task sets can be defined for each property type, unit configuration and tenancy, so a furnished student bed, an unfurnished apartment and a commercial suite each get their own move-in and move-out steps. Tasks are generated automatically when a lease is signed or notice is recorded, and assigned to the right team.
Does the tenant see a breakdown before the refund is paid?
Yes. The final statement itemises every deduction, outstanding charge and the refund amount before any payment is issued, and each damage line can carry inspection photos and its cost basis. The tenant reviews the statement first, which gives them a clear chance to query an item before the deposit is settled.
How quickly can a unit be relisted?
As soon as the move-out workflow closes. Once the move-out inspection, turn tasks and final statement are complete, the unit's status updates to available and leasing can publish it, including to connected listing sites. Tracking days to make ready by property shows where turns are slowing down and costing rent.
Is there a dispute process?
Yes. RIOO keeps the move-in and move-out inspection reports, dated photos and charge calculations together on the unit and lease, giving your team a clear evidence base for resolving disputes. Where a deposit is held in a protection or bond scheme, that same evidence supports the scheme's dispute process in each market.
Can prorated rent be calculated automatically at move-in?
Yes. When a lease starts mid-month, RIOO calculates the prorated rent for the partial period according to your proration method, such as actual days or a 30-day month, and adds it to the move-in charges. The invoice posts to NetSuite in the correct period, so income for that month is accurate.
Do deposits post as income in NetSuite?
No. Security deposits are held as a liability, not income, because they belong to the tenant until deductions are agreed. When the tenancy ends, approved deductions are applied against that liability and the balance is refunded, so the liability account for each property reconciles to the deposits actually held.
Related
Related to move-ins & move-outs




Start and end every tenancy with a clean record.












